(EW 01)Ear wires with eye pins (6 Pairs)

6 pairs of ear wires, with 12 eye pins

Size:   22mm x 18 x 0.7mm, with a 2mm loop

To use the eye pins as bails with polymer clay:

• Put a loop in other end of eye pin.  (As shown in image of finished earrings)
• Gently press into back of decorated piece.
• Cure at usual temp.  It may fall out after curing, not a problem.
• Cover back with a layer of clay, having checked bail is still in correct position.  Trim off excess and cure again.

16mm jump rings available as alternative bail option as pictured