(CF 10) Cone Bead Formers x10

HOME > BEAD FORMERS

<!--010-->(CF 10) Cone Bead Formers x10
  • <!--010-->(CF 10) Cone Bead Formers x10
  • <!--010-->(CF 10) Cone Bead Formers x10
  • <!--010-->(CF 10) Cone Bead Formers x10
  • <!--010-->(CF 10) Cone Bead Formers x10
  • <!--010-->(CF 10) Cone Bead Formers x10

  • (CF 10) Cone Bead Formers x10

  • Set of 10 Cone Bead Formers
  • £3.20

:  at  £3.20  each

REDUCED PRICE - WAS £7.00

Cone bead formers are made from stainless steel (standard use is as piping nozzles). 

Height of each finished cone bead will be approx 3cm.

This set contains 10 nozzles of the same size, with a template for cutting the clay to fit.  A set of 10 offers better value, plus the ability to cure in larger batches.

Clear instructions on how best to use this kit is included.  Plus a sample spacer bead and small cutters to make these.

The feature bead was cured over one of our oval stainless steel soaps (SS 02), using a 'Rose Petal' (51x70mm) cutter from set CS52.

NB: Nozzles may not be exactly as pictured, and have a different size piping hole. The difference in size between nozzles is minimal. However the templates need to be refined.  Hence one size nozzle per set is preferable.

All 5 sizes are pictured with their corresponding brightly coloured templates, for those of you that need to know!